Hot Air Dryer for Plastic Resins
The Single Pass Hot Air Dryer from K-Tron is ideal for drying non-hygroscopic resins. The process air heater and all other components are accessible from the unit's exterior.
Features:
- Floor Stand
- High Efficiency Blower and Motor
- Process Air Filter
- Tubular Incoloy Sheath Heaters
- NEMA 1 Control Enclosure
- Voltage: 208,230, 460/3/60
- Solid State Controls
Optional Features:
- Over-Temperature Alarm
- High Heat to 400°F
- U.L. Listed Controls
| Model | Airflow | Nominal Dimensions (inches) | ||
|---|---|---|---|---|
| CFM | Width | Length | Height | |
| PHH-80 | 80 | 23 | 23.5 | 50.5 |
| PHH-120 | 120 | 23 | 23.5 | 50.5 |
| PHH-180 | 180 | 23 | 23.5 | 53 |
| PHH-250 | 250 | 26 | 24 | 55 |
| PHH-400 | 400 | 33 | 28 | 58 |
| PHH-600 | 600 | 41 | 31 | 65.5 |
| PHH-750 | 750 | 35 | 31 | 66.5 |
| PHH-1000 | 1,000 | 41 | 34 | 68 |
| PHH-1500 | 1,500 | 41.5 | 36.5 | 78 |
| PHH-2000 | 2,000 | 41 | 34 | 68 |
| PHH-2500 | 2,500 | 81 | 55.5 | 82.5 |
| PHH-3000 | 3,000 | TBD | TBD | TBD |
| PHH-4000 | 4,000 | TBD | TBD | TBD |
| PHH-7500 | 7,500 | 157 | 156 | 108 |
