Components

Premier is a member of the
K-Tron Process Group
K-Tron Feeders

2410/2415 Vacuum Sequencing Central Conveying Receivers

The 2410 and 2415 vacuum receivers are designed to handle powder, pellet, regrind, or granular materials. The modular designed receivers allow flexibility in the selection of material construction, power, filtration, and receiver inlet sections to meet your current pneumatic conveying application requirements as well as your future needs. Each section of the receiver is attached by quick-connect clamps to facilitate filter maintenance and receiver cleaning.

Series 2410/2415 Vacuum Receivers Materials of Construction

The vacuum receivers are available in either aluminum or 316 stainless steel construction. Components of different construction are interchangeable allowing receivers to be specified with stainless steel material contact areas only.

Central or Self Contained Vacuum Source

You can choose between a self contained vacuum source mounted in the receiver’s lid, or a central system vacuum blower. Central system units (2410 and 2415 Receivers) utililze a common vacuum blower package, and are primarily used on multiple-destination applications where larger conveying rates or long distances are required.

Request Quote | Contact Rep

Download Spec Sheets

Spec Sheets require Adobe’s Acrobat Reader to view. If you are already logged in with your Premier Pneumatics account, you will automatically be redirected to the download page. If not, you will be asked to provide us with some basic information prior to downloading.

2410 Vacuum Receiver Conveying Rates

Based on a distance of 15 m [50 ft] and bulk density of 0.5 kg/dm3 [31 lb/ft3]. Rates vary with material characteristics, conveying distance and plant layout.

2410 Pellet Receiver	2410 Powder Receiver
Up to 1,180 kg/hr [2,600 lb/hr]	Up to 408 kg/hr [900 lb/hr]

2410 Vacuum Receiver Mechanical Specifications

Aluminum or stainless steel construction
Volume capacity 10 dm³ [0.36 ft³]
254 mm [10 in] diameter housing
Up to 50.8 mm [2 in] tangential inlet with stainless steel check valve assembly
Stainless steel band clamps
Integral air control valve with backside vent, dual acting air cylinder with solenoid control 24 VDC
One-piece stainless steel 127 mm [5 in] discharge gate with white Neoprene seal
Inductive proximity switch level-sensing system on discharge gate 24 VDC
Automatic reverse jet cleaning 1.7 dm³ [.06 ft³] air reservoir; 6.9 bar max [100 psig]

2410 Vacuum Receiver Standard Filtration Options

Perforated filter element for pellets
16 oz polyester cloth fi lter bag with snap-ring seal for powder, total 0.3716 m² [4 ft²] filter area

2410/2415 Vacuum Sequencing Receiver Controls

For single receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller seamlessly interfaces with K-Tron Feeder controls.

2415 Vacuum Receiver Conveying Rates

Based on a distance of 15 m [50 ft] and bulk density of 0.5 kg/dm³ [31 lb/ft³]. Rates vary with material characteristics, conveying distance and plant layout.

2415 Pellet Receiver	2415 Powder Receiver
Up to 2720 kg/hr [6000 lb/hr]	Up to 1000 kg/hr [2200 lb/hr]

2415 Vacuum Receiver Mechanical Specifications

Aluminum or stainless steel construction
Volume capacity 26 dm³ [0.92 ft³]
381 mm [15 in] diameter housing
Up to 76.2 mm [3 in] tangential inlet with stainless steel check valve assembly
Stainless steel band clamps
Integral air control valve with backside vent, dual acting air cylinder with solenoid control 24 VDC
One-piece stainless steel 127 mm [5 in] discharge gate with white Neoprene seal
Inductive proximity switch level-sensing system on discharge gate 24 VDC
Automatic reverse jet cleaning 1.8 dm³ [0.06 ft³] air reservoir; 6.9 bar max [100 psig]

2410 Vacuum Receiver Standard Filtration Options

Perforated filter element for pellets
16 oz polyester cloth filter bag with snap-ring seal for powder, total 0.8361 m² [9 ft²] filter area