2423 Powder Vacuum Receiver

2423 Powder Vacuum Receiver Overview

• Available with carbon steel construction with epoxy coated interior and painted enamel on the exterior or with 304 stainless steel material contact.
•  The 2423 powder receiver has a large filter cartridge with 50-square feet of spunbond polyester media. It is automatically cleaned with bursts of compressed air.
• 60 degree hopper with 10-inch gravity discharge gate with white Neoprene seal.
• Band clamps for quick body section separation.
• 3-inch tangential inlet with stainless steel check valve.
• 3-inch air control valve.
• 22-inch diameter housing.
• Ideal for conveying PVC compound.

2423 Powder Receiver Features

• 3-inch air control valve
• 22-inch diameter housing
• 3-inch tangential inlet with stainless steel check valve
• Available with carbon steel construction with epoxy coated interior and painted enamel on the exterior or with 304 stainless steel material contact
• Band clamps for quick body section separation
• 60° hopper with 10-inch gravity discharge gate with white Neoprene seal

Powder Mounting Ring Features

• Carbon steel or 304 stainless steel construction, 24-in. high.
• Flanged extension with 360o gate access by removing a 12 oz. P.T.F.E. filter cloth sleeve.
• Flanged bolt pattern allows for receiver position in 26° increments.

Installation Kits

K-Tron installation kits make installing the 2400 system easier and more economical. Each kit includes all the necessary cable and “T” connectors to connect receivers to the Central PLC Controller. The cable comes pre-terminated with “quick-connect” plugs to accommodate easy installation without tools.

The “T” connectors act as a junction box for each receiver’s cable. Using these kits will reduce the chance for incorrect wiring, enabling a trouble-free installation and start-up.

Solid-State Receiver Panel

Each receiver is equipped with a solid-state control panel with quick connectors to simplify the connection to the central system controller. Via commands from the Central Controller, it actuates the solenoids for the fill valve, bag pulse and inlets.

A clear cover allows visual verification that the receiver is calling for material, and a switch lets the operator take the unit off-line

2423 Powder Vacuum Receiver Controls

For single receiver applications, we offer the LSR Controller. In loss-in-weight feeder refill applications, the LSR Controller seamlessly interfaces with K-Tron Feeder controls.

Download Spec Sheets

• 2406 Receivers
• 2410 Pellet Receivers
• 2410 Powder Receivers
• 2415 Pellet Receivers
• 2415 Powder Receivers
• 2420 Receivers
• 2423 Powder Receivers
• 2424 Pellet Receivers
• 2424 Powder Receivers
• Series 4 MPC Controller
• Series 4 PLC Controller
• LSR Controller
• P10 Receiver
• P30 Receiver
• P100 Receiver

Spec Sheets require Adobe’s Acrobat Reader to view. If you are already logged in with your
K-Tron account, you will automatically be redirected to the download page. If not, you will be asked to provide us with some basic information prior to downloading.